Drywall Issues at Home: DIY Fixes Vs Professional Drywall Repair

If your home is old or was constructed using less-than-stellar materials and workmanship, you might see cracks, holes, or water damage in your drywall.

Some drywall repairs are easy to make on your own if you have the right tools and materials and a bit of home improvement experience. But in other cases, the problem may be severe or extensive enough to warrant calling in an expert.

DIY Drywall Repair

Small cracks and nail holes are relatively easy to fix if the problem is localized and not a symptom of a larger construction issue.

Using drywall compound, drywall tape, and a drywall knife, you can patch over damaged areas. You can check for Drywall Edmonton and Alberta Drywall Edmonton for Drywall Repair online and see some example drywall installation.

Image result for images of drywall installation

In general, it's best to apply the drywall compound in several layers, letting each layer dry and sanding it smooth before applying the next layer. Note that you may need to fill in cracks and apply drywall tape before patching them over.

Professional Drywall Repair

A large, creeping crack or a bulging area of drywall can indicate a deeper issue within your walls. Perhaps the drywall has shifted due to moisture or poor installation. You can read more about the professional drywall repair.

Image result for images of drywall installation

Perhaps the drywall was not securely screwed in when it was first installed. There could be dozens of reasons for a major drywall problem, and patching it over will only postpone necessary repairs and can make them more expensive when the time comes.

Health Considerations

If you choose to complete wall and ceiling repair on your own, you must be aware of health considerations related to working with drywall components.

Drywall sanding dust can be a respiratory irritant, so it's important to always wear a mask during and after sanding.

Drywall particles can linger in the air and on floors and furniture after the job is done, so be sure to let everything settle and to vacuum thoroughly.