What is Wire EDM?

What exactly is wire electrical discharge machining, also known as Wire EDM? Wire EDM is the method whereby hard metals, those that historicallyin the past could not be machined or manipulated by traditional methods, could now be machined, manipulated and designed by electrical charges in order to cut away the undesirable metal in to heretofore unattainable shapes and designs with greater tolerances and precision. You can also get info about EDM Events.

The limiting requirement for wire EDM is that the material must be electrically conductive. An example of traditional machining is putting a metal pipe on a lathe and turning it while cutting it with a carbide tip or some other similar cutting tool; in much the same way that wood is lathe-cut. While this is a simple example and shows how wide variances can be from product to product, wire EDM can permit companies to now manufacture much more elaborate items from metals heretofore incapable of being worked, even cutting shapes in to 3D and intricate Jewelry designs.

Observed originally by Joseph Priestly in 1770, electrical discharge machining had its start but was imprecise and liable to failures. However, it was not until it was fully developed and commercially available in the mid-1970s that wire EDM began its speedy rise and came in to its own in the 1980s when it migrated in to a machine device and became much more widely available and pretty over the traditional machining processes. In attempts to work with metals that were harder and to increase the precision of the cut, wire EDM allows for that ability and precision. You can also visit www.justvibeit.com to get more info.

There's general types of Electrical Discharge Machining, ram EDM and wire EDM. For the scope of this document, they will only speak about the latter – wire EDM.