When using Ethernet Cables, we hear the term CAT5e Cable and CAT6 Cable, so what is the difference? Both of these cables are referred to as twisted pair copper cable, both of them have 8 individual insulated copper wires and both are normally terminated with an RJ-45 connector. So what’s the big deal?
The original Ethernet data standards used the copper coaxial cable to transfer data on the early packet switched networks.
Its Creamy Yellow external covered coating used relatively rigid 0.375 inches, 50-ohm impedance coaxial cable, and usually classified 10Base5 networks. It was typically mounted on the wall just like a Dado Rail and was generally known as Solid Ethernet. It had been designed to complete Ethernet indicators at 10 Mbps over a length of 500 yards, and this could possibly be expanded up to 2500 meters using 4 repeaters.
10Base2 networks implemented 50-ohm impedance coaxial cable that has been significantly thinner and much more versatile than 10Base5, but the Ethernet indicators were however made to be sent over this channel at 10 Mbps, albeit over a considerably smaller length of around 185 metres, which could be extended up to 925 metres together with the supplement of 4 repeaters. Both 10Base2 specifications and the 10Base5 have become mostly obsolete and twisted-pair cable is now the most popular wired network medium.For this you can navigate 8-Port Cat 5 KVM Switch with Daisy-Chain Port, Cat 5 KVM Switch, 16-Port Cat 5 KVM Switch from verified online sources.
Twisted Pair Ethernet Cable
10BaseT was created inside the 1980s plus it mainly utilized Classification 3 cable for transmissions up over miles up to 100 yards to 10 Mbs. Ethernet standards evolved to add faster data rate transmission as well as the 10BaseTx 100 Mbps were introduced. Cat3 cable was no longer had sufficient bandwidth a reaction to take care of these faster technologies and Cat5e cable expectations and so the Cat5 were presented which helped information rates at 1000 Mbps and up to 100 Mbps.
So what will be the distinction between CAT6 Cable and CAT5e? Effectively the cables are built with 4 copper couples in a similar approach, producing 8 cables in total. Each set of cables is color-coded and complicated around each other to assist minimize Crosstalk.
Whereas Cat5e Ethernet Wire merely has 1.5 to 2 turns per centimeter cat6 Ethernet Cable has over 2 turns per centimeter. The effect is the fact that Cat6 Wire protects against Crosstalk. Another difference is when you compare Cat6, the fact that the sheath width can be better.