Ceramic tiles are an excellent addition to almost any home. They completely transform a space into one that's spacious and contemporary.
If you're thinking about purchasing ceramic tiles for your house, then you may also be thinking about doing the setup yourself.
However you might be on a budget or some keen DIY enthusiast and wish to set up yourself, so have a peek at this step-by-step guide to ceramic tile floors installation. You can also opt for perfect Pert tiling services online.
Image Source: Google
Measure 1:
Make sure your surface is clean and free of moisture. You ought to be placing tiles directly onto concrete, don't put new tiles on wood or some other tiles. To check the moisture of the ground, lay down a plastic sheet and then tape the sides of down it.
Measure 2:
Decide how you'll put out your tiles. Ideally, the complete tiles must begin at the doorway, since there could be an area around the borders of the room which will require half a tile.
Lay down four tiles and add spacers between them. Push the tiles together so the sole gap is your spacer.
Measure 3:
After the floor is dry, then remove all of the spacers between the tiles. You're now ready to grout. Mix the grout according to the directions by the manufacturer.